Skip to main content

Denver, CO

Space and Aerospace 3D Printing for Denver

The Front Range builds satellites, launch vehicles and the systems around them, from Littleton and Centennial to Boulder, and the ground side of that work is full of one-off parts: harness boards, test fixtures, transport covers. Printing them keeps integration and test moving between hardware revisions.
Get Instant Quote3D printing in Denver

What we print for space & aerospace teams

Ground support fixtures

Holding and handling fixtures for integration and test, stiff in carbon-fiber nylon.

Harness boards and cable forms

Peg boards and forms that lay out a harness to the drawing.

Covers, caps and protective parts

Remove-before-flight style covers and connector caps for handling and transport.

Test-article prototypes

Fit-check models of brackets and housings before metal parts are made.

Materials for the job

FDM

PA-CF (Carbon Fiber Nylon)

Tensile 90–110 MPa · heat ~140 °C

FDM

Polycarbonate (PC)

Tensile 55–75 MPa · heat ~140 °C

FDM

ASA (Acrylic Styrene Acrylonitrile)

Tensile 45–55 MPa · heat ~100 °C

FDM

PETG-CF (Carbon Fiber PETG)

Tensile 60–70 MPa · heat ~85 °C

FDM

TPU (Thermoplastic Polyurethane)

Tensile 30–50 MPa · heat ~80 °C

What we do not do

We print ground support equipment, fixtures and prototypes, not flight hardware. Outgassing and vacuum performance are not characterized for printed parts, and we hold no AS9100 certification.

Tolerances: FDM ±0.2 mm typical; SLA ±0.1 mm, or ±0.2% above 100 mm. Production takes 2-5 business days.

Related guides

Space & Aerospace 3D printing in Denver: questions

Do you print space & aerospace parts for teams in Denver?
Yes. We print in Fort Lauderdale, FL and ship to Denver and the surrounding area, including Boulder, Aurora, Lakewood. Production takes 2-5 business days, and checkout shows each carrier's delivery estimate for your address.
Which materials suit space & aerospace parts?
Most often PA-CF, Polycarbonate (PC), ASA, PETG-CF, TPU, chosen for the applications above. Each material page lists its typical strength, heat resistance and uses.
What do you not do?
We print ground support equipment, fixtures and prototypes, not flight hardware. Outgassing and vacuum performance are not characterized for printed parts, and we hold no AS9100 certification.
All space & aerospace 3D printing →All cities we serve →