FDM material
Carbon Fiber PETG 3D Printing
PETG reinforced with chopped carbon fibers for increased stiffness and dimensional stability.
Properties
- Tensile Strength
- 60–70 MPa
- Heat Resistance
- ~85 °C
- Flexibility
- Low
- Chemical Resistance
- High
- Relative Cost
- $$$
- Density
- 1.30 g/cm³
- Stiffness
- High
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Structural parts
- Drone frames
- Lightweight fixtures
How we print it
- Tolerance
- ±0.2 mm typical
- Largest part in one piece
- 350 × 320 × 325 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in PETG-CF. About FDM printing →
Compare with
Related guides
PETG-CF: common questions
What is PETG-CF good for?
PETG-CF is a common choice for structural parts, drone frames, lightweight fixtures. PETG reinforced with chopped carbon fibers for increased stiffness and dimensional stability.
How strong and heat-resistant is PETG-CF?
Printed PETG-CF parts have a typical tensile strength of 60–70 MPa and heat resistance of ~85 °C. These are typical values for printed parts in the XY direction; strength between layers is lower, so orientation matters for loaded parts.
How big a part can you print in PETG-CF, and how fast?
Up to 350 × 320 × 325 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.