FDM material
Carbon Fiber Composite 3D Printing
Nylon or PLA base reinforced with chopped carbon fibers for exceptional stiffness-to-weight ratio.
Properties
- Tensile Strength
- 70–90 MPa
- Heat Resistance
- ~120 °C
- Flexibility
- Very Low
- Chemical Resistance
- High
- Relative Cost
- $$$
- Density
- 1.20 g/cm³
- Stiffness
- Very High
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Drone frames
- RC car parts
- Structural brackets
- Performance parts
How we print it
- Tolerance
- ±0.2 mm typical
- Largest part in one piece
- 350 × 320 × 325 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Carbon Fiber-filled. About FDM printing →
Compare with
Related guides
Carbon Fiber-filled: common questions
What is Carbon Fiber-filled good for?
Carbon Fiber-filled is a common choice for drone frames, rc car parts, structural brackets, performance parts. Nylon or PLA base reinforced with chopped carbon fibers for exceptional stiffness-to-weight ratio.
How strong and heat-resistant is Carbon Fiber-filled?
Printed Carbon Fiber-filled parts have a typical tensile strength of 70–90 MPa and heat resistance of ~120 °C. These are typical values for printed parts in the XY direction; strength between layers is lower, so orientation matters for loaded parts.
How big a part can you print in Carbon Fiber-filled, and how fast?
Up to 350 × 320 × 325 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in Carbon Fiber-filled
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote