SLA material
Biocompatible Dental Resin 3D Printing
Biocompatible dental resin for dental models, surgical guides and custom trays. Its biocompatibility rating belongs to the resin as its manufacturer tested it (ISO 10993), post-cured to the manufacturer's protocol; a printed part is not an FDA-cleared medical device. Ask for the manufacturer's documentation before ordering a part that will contact a patient.
Properties
- Resolution
- 25 µm
- Surface Finish
- Very Smooth
- Flexibility
- Low (rigid)
- Chemical Resistance
- High
- Relative Cost
- $$$$
- Density
- 1.20 g/cm³
- Accuracy
- ±50 μm
- Heat Resistance
- ~80 °C
- Biocompatibility
- Manufacturer-rated (ISO 10993)
- Tensile Strength
- 70–80 MPa
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Dental models
- Surgical guides
- Orthodontic aligners
- Crown & bridge models
How we print it
- Tolerance
- ±0.1 mm, or ±0.2% above 100 mm
- Largest part in one piece
- 353.2 × 198.7 × 400 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Dental Resin. About SLA printing →
Compare with
Related guides
Dental Resin: common questions
What is Dental Resin good for?
Dental Resin is a common choice for dental models, surgical guides, orthodontic aligners, crown & bridge models. Biocompatible dental resin for dental models, surgical guides and custom trays. Its biocompatibility rating belongs to the resin as its manufacturer tested it (ISO 10993), post-cured to the manufacturer's protocol; a printed part is not an FDA-cleared medical device. Ask for the manufacturer's documentation before ordering a part that will contact a patient.
How much detail can Dental Resin hold?
Dental Resin prints at 25 µm layer resolution with a very smooth surface finish, and holds ±0.1 mm, or ±0.2% on dimensions above 100 mm.
How big a part can you print in Dental Resin, and how fast?
Up to 353.2 × 198.7 × 400 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in Dental Resin
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote