SLA material
Glass-Filled Rigid Resin 3D Printing
Resin reinforced with glass particles for very high stiffness, low creep and good heat resistance. Thin, long features stay straight where unfilled resins sag or warp. The resin to pick when a part must not bend: fixtures, manifolds and thin-walled housings.
Properties
- Resolution
- 50 µm
- Surface Finish
- Satin
- Flexibility
- Very Low
- Chemical Resistance
- High
- Heat Resistance
- ~110 °C
- Stiffness
- Very High
- Relative Cost
- $$$$
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Jigs & fixtures
- Fluid manifolds
- Thin-walled housings
- Wind-tunnel models
How we print it
- Tolerance
- ±0.1 mm, or ±0.2% above 100 mm
- Largest part in one piece
- 353.2 × 198.7 × 400 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Glass-Filled Rigid Resin. About SLA printing →
Compare with
Related guides
Glass-Filled Rigid Resin: common questions
What is Glass-Filled Rigid Resin good for?
Glass-Filled Rigid Resin is a common choice for jigs & fixtures, fluid manifolds, thin-walled housings, wind-tunnel models. Resin reinforced with glass particles for very high stiffness, low creep and good heat resistance. Thin, long features stay straight where unfilled resins sag or warp. The resin to pick when a part must not bend: fixtures, manifolds and thin-walled housings.
How much detail can Glass-Filled Rigid Resin hold?
Glass-Filled Rigid Resin prints at 50 µm layer resolution with a satin surface finish, and holds ±0.1 mm, or ±0.2% on dimensions above 100 mm.
How big a part can you print in Glass-Filled Rigid Resin, and how fast?
Up to 353.2 × 198.7 × 400 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in Glass-Filled Rigid Resin
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote