SLA material
Standard Photopolymer Resin 3D Printing
High-detail resin for smooth surface finish and fine features.
Properties
- Resolution
- 25–50 µm
- Surface Finish
- Very Smooth
- Flexibility
- Low (rigid)
- Chemical Resistance
- Low
- Relative Cost
- $$
- Density
- 1.18 g/cm³
- Heat Resistance
- ~50 °C
- Tensile Strength
- 60–70 MPa
- Detail Resolution
- 25 μm
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Jewelry casting
- Dental models
- Miniatures
- Display models
How we print it
- Tolerance
- ±0.1 mm, or ±0.2% above 100 mm
- Largest part in one piece
- 353.2 × 198.7 × 400 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Standard Resin. About SLA printing →
Compare with
Related guides
Standard Resin: common questions
What is Standard Resin good for?
Standard Resin is a common choice for jewelry casting, dental models, miniatures, display models. High-detail resin for smooth surface finish and fine features.
How much detail can Standard Resin hold?
Standard Resin prints at 25–50 µm layer resolution with a very smooth surface finish, and holds ±0.1 mm, or ±0.2% on dimensions above 100 mm.
How big a part can you print in Standard Resin, and how fast?
Up to 353.2 × 198.7 × 400 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in Standard Resin
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote