FDM material
PAHT-CF (High-Temp Carbon Fiber Nylon) 3D Printing
High-temperature carbon fiber nylon with elevated heat deflection and stiffness. Designed for high-flow industrial hotends and heated chambers.
Properties
- Tensile Strength
- 95–115 MPa
- Heat Resistance
- ~150 °C
- Flexibility
- Very Low
- Chemical Resistance
- Very High
- Relative Cost
- $$$$
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Under-hood automotive
- Industrial tooling
- Heat-exposed end-use parts
How we print it
- Tolerance
- ±0.2 mm typical
- Largest part in one piece
- 350 × 320 × 325 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in PAHT-CF. About FDM printing →
Compare with
Related guides
PAHT-CF: common questions
What is PAHT-CF good for?
PAHT-CF is a common choice for under-hood automotive, industrial tooling, heat-exposed end-use parts. High-temperature carbon fiber nylon with elevated heat deflection and stiffness. Designed for high-flow industrial hotends and heated chambers.
How strong and heat-resistant is PAHT-CF?
Printed PAHT-CF parts have a typical tensile strength of 95–115 MPa and heat resistance of ~150 °C. These are typical values for printed parts in the XY direction; strength between layers is lower, so orientation matters for loaded parts.
How big a part can you print in PAHT-CF, and how fast?
Up to 350 × 320 × 325 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.