FDM material
Glass Fiber Composite 3D Printing
Nylon base reinforced with glass fibers for improved strength and dimensional stability.
Properties
- Tensile Strength
- 60–80 MPa
- Heat Resistance
- ~120 °C
- Flexibility
- Low
- Chemical Resistance
- High
- Relative Cost
- $$
- Density
- 1.35 g/cm³
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Industrial tooling
- Structural supports
- Automotive brackets
How we print it
- Tolerance
- ±0.2 mm typical
- Largest part in one piece
- 350 × 320 × 325 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Glass Fiber-filled. About FDM printing →
Compare with
Related guides
Glass Fiber-filled: common questions
What is Glass Fiber-filled good for?
Glass Fiber-filled is a common choice for industrial tooling, structural supports, automotive brackets. Nylon base reinforced with glass fibers for improved strength and dimensional stability.
How strong and heat-resistant is Glass Fiber-filled?
Printed Glass Fiber-filled parts have a typical tensile strength of 60–80 MPa and heat resistance of ~120 °C. These are typical values for printed parts in the XY direction; strength between layers is lower, so orientation matters for loaded parts.
How big a part can you print in Glass Fiber-filled, and how fast?
Up to 350 × 320 × 325 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in Glass Fiber-filled
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote