FDM material
Matte-Finish PLA 3D Printing
PLA with a smooth matte finish that hides layer lines. Professional look without post-processing.
Properties
- Tensile Strength
- 48–56 MPa
- Heat Resistance
- ~58 °C
- Flexibility
- Low
- Chemical Resistance
- Low
- Relative Cost
- $
- Density
- 1.24 g/cm³
- Surface Finish
- Matte
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Presentation models
- Architectural models
- Art pieces
How we print it
- Tolerance
- ±0.2 mm typical
- Largest part in one piece
- 350 × 320 × 325 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Matte PLA. About FDM printing →
Compare with
Related guides
Matte PLA: common questions
What is Matte PLA good for?
Matte PLA is a common choice for presentation models, architectural models, art pieces. PLA with a smooth matte finish that hides layer lines. Professional look without post-processing.
How strong and heat-resistant is Matte PLA?
Printed Matte PLA parts have a typical tensile strength of 48–56 MPa and heat resistance of ~58 °C. These are typical values for printed parts in the XY direction; strength between layers is lower, so orientation matters for loaded parts.
How big a part can you print in Matte PLA, and how fast?
Up to 350 × 320 × 325 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.