FDM material
High-Flow PETG 3D Printing
PETG optimized for higher flow rates and faster printing while maintaining clarity and strength.
Properties
- Tensile Strength
- 48–55 MPa
- Heat Resistance
- ~78 °C
- Flexibility
- Medium
- Chemical Resistance
- High
- Relative Cost
- $$
- Density
- 1.27 g/cm³
- Print Speed
- Up to 250 mm/s
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Batch production
- Large prints
- Rapid prototyping
How we print it
- Tolerance
- ±0.2 mm typical
- Largest part in one piece
- 350 × 320 × 325 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in High-flow PETG. About FDM printing →
Compare with
Related guides
High-flow PETG: common questions
What is High-flow PETG good for?
High-flow PETG is a common choice for batch production, large prints, rapid prototyping. PETG optimized for higher flow rates and faster printing while maintaining clarity and strength.
How strong and heat-resistant is High-flow PETG?
Printed High-flow PETG parts have a typical tensile strength of 48–55 MPa and heat resistance of ~78 °C. These are typical values for printed parts in the XY direction; strength between layers is lower, so orientation matters for loaded parts.
How big a part can you print in High-flow PETG, and how fast?
Up to 350 × 320 × 325 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in High-flow PETG
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote