SLA material
Ceramic-filled Resin 3D Printing
Ceramic-loaded photopolymer for stiff, heat-tolerant parts with a stone-like finish. High dimensional accuracy and low shrinkage.
Properties
- Resolution
- 25–50 µm
- Surface Finish
- Matte
- Flexibility
- Very Low
- Chemical Resistance
- High
- Heat Resistance
- ~120 °C
- Relative Cost
- $$$
Typical values for printed parts. Strength between layers is lower than along them.
Good for
- Stiff jigs & fixtures
- Architectural models
- Decorative stone-finish parts
How we print it
- Tolerance
- ±0.1 mm, or ±0.2% above 100 mm
- Largest part in one piece
- 353.2 × 198.7 × 400 mm
- Production
- 2-5 business days; rush available
Upload a CAD file for an instant price in Ceramic-filled Resin. About SLA printing →
Compare with
Related guides
Ceramic-filled Resin: common questions
What is Ceramic-filled Resin good for?
Ceramic-filled Resin is a common choice for stiff jigs & fixtures, architectural models, decorative stone-finish parts. Ceramic-loaded photopolymer for stiff, heat-tolerant parts with a stone-like finish. High dimensional accuracy and low shrinkage.
How much detail can Ceramic-filled Resin hold?
Ceramic-filled Resin prints at 25–50 µm layer resolution with a matte surface finish, and holds ±0.1 mm, or ±0.2% on dimensions above 100 mm.
How big a part can you print in Ceramic-filled Resin, and how fast?
Up to 353.2 × 198.7 × 400 mm in one piece; larger parts are printed in sections and joined, after a review. Production takes 2-5 business days, and rush service is available.
Print it in Ceramic-filled Resin
Upload a STEP, STL, 3MF or OBJ file for an instant price.
Get an Instant Quote